
Key specifications
- SizesDN 25 to DN 300
- Design standardBS 5156, DIN 3202
- Flanged endsANSI #150, PN10, BS10, Table D, E and F
- BodyCI, DI or alloy steel
- Body liningEbonite (hard), natural, butyl, neoprene, EPDM, nitrile
- DiaphragmNatural, butyl, neoprene, EPDM, nitrile, Hypalon, PTFE with rubber pad
- CertifiedISO 9001:2015, ISO 14001:2015, ISO 45001:2018
Dimensions and weights
Dimensions in millimetres. We reserve the right to change specifications without notice.
Unlined, raised face (RF)
| DN | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H, open (mm) | 140 | 139 | 172 | 190 | 230 | 242 | 326 | 391 | 468 | 683 | 839 | 997 |
| H1, closed (mm) | 132 | 127 | 152 | 166 | 197 | 206 | 276 | 326 | 390 | 563 | 694 | 822 |
| A, BS (mm) | 127 | 146 | 159 | 190 | 216 | 254 | 305 | 356 | 406 | 521 | 635 | 749 |
| A, DIN (mm) | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | 730 | 850 |
| Weight, BS (kg) | 4.2 | 6.4 | 7.5 | 12 | 18 | 23 | 34 | 50 | 69 | 150 | 220 | 300 |
| Weight, DIN (kg) | 4.4 | 6.6 | 8.5 | 12.5 | 19 | 25 | 36 | 52 | 75 | 160 | 235 | 315 |
Rubber lined, full face (FF)
| DN | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H, open (mm) | 143 | 142 | 175 | 193 | 233 | 245 | 330 | 395 | 472 | 687 | 843 | 1001 |
| H1, closed (mm) | 133 | 130 | 155 | 169 | 200 | 209 | 280 | 330 | 394 | 567 | 698 | 826 |
| A, BS (mm) | 133 | 152 | 165 | 196 | 222 | 260 | 313 | 364 | 414 | 529 | 643 | 757 |
| A, DIN (mm) | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | 730 | 850 |
| Weight, BS (kg) | 5 | 7 | 8.5 | 13 | 19 | 25 | 36 | 53 | 73 | 155 | 227 | 307 |
| Weight, DIN (kg) | 5.5 | 8 | 9.5 | 14.5 | 20 | 27 | 38 | 55 | 79 | 165 | 242 | 322 |
| ØB min (mm) | 26 | 32 | 38 | 51 | 63.5 | 76 | 102 | 127 | 152 | 203 | 254 | 305 |
| ØK (mm) | 120 | 120 | 120 | 164 | 220 | 240 | 270 | 270 | 360 | 460 | 600 | 700 |
Parts and materials
Spare diaphragms, compressors and other parts are available for this valve.
| No | Part | Material |
|---|---|---|
| 1 | Body | CI / DI / Alloy steel |
| 1A | Lining | Rubber |
| 02 | Diaphragm | Rubber / PTFE + rubber pad |
| 03 | Compressor | CI |
| 04 | Bonnet | CI / DI / Alloy steel |
| 05 | Spindle | Steel |
| 06 | Handwheel | CI |
| 07 | Handwheel pin | Steel |
| 08 | Body studs and nuts | Steel |
| 09 | Thrust washer | Nylon |
| 10 | Compressor pin | Steel |
Why choose a diaphragm valve
- Bidirectional, for on-off and moderate throttling duty
- Fluid is isolated from the spindle, so there is no leak path around the stem
- Smooth flow path with no pockets to trap solids or slurries
- Wide choice of linings for corrosive and hazardous chemicals
- Suits food, pharma and brewing duty, where contamination is not tolerated
BJ VALVES PVT. LTD.